This post is about an alternative firmware available for the Nebulae 2 (Neb2) eurorack module.
The eurorack module and most of the underlying software is made by Qu-Bit Electronix. Thank you!
The firmware available here is made by an enthusiast for these various sound platforms. I am not affiliated with Qu-Bit and the software hasn't been officially sanctioned by them. (The software is pretty cool, though!)
|
The version of firmware for this post is: danish06 To use this file: Click the DOWNLOAD button to the right --> a) a README file with a few instructions, and Follow Qu-Bit's instructions for loading firmware files on your Neb2. |
Neb2Firmware06.zip |
This "danish##" firmware is based on Qu-Bit's 2.1.2 version. Newer versions of danish firmware are compatible with older versions unless otherwise specified.
Changelog:
-----------------------------
danish06 (28Jun2019):
Allows PD instruments to be loaded and run without crashing.
Improves the robustness of the code.
Correctly sets speed and pitch settings in Code/config/defaultnebsettings.txt
-----------------------------
danish05 (20Jun2019):
Includes code to allow user instruments to use red recording LEDs and reset (eol) LEDs if desired.
Includes code to allow other 'unique instrument' methods to work with user instruments.
Extends code to facilitate communication from Csound to python.
Includes the code that allows the module to be powered up correctly after being powered down with a user instrument loaded and running.
None at this time.
Click for current and older versions of the "danish##" firmware for the Neb2.
The firmware available here is not an official version of the firmware from Qu-Bit. The files available here are alternative versions of the software available from Qu-Bit. Please use these alternative versions at your own risk. (It is recommended that you keep a copy of the official firmware file from Qu-Bit, in case you need to reinstall an official version to your module.)
This post is about an alternative firmware available for the Nebulae 2 (Neb2) eurorack module.
The eurorack module and most of the underlying software is made by Qu-Bit Electronix. Thank you!
The firmware available here is made by an enthusiast for these various sound platforms. I am not affiliated with Qu-Bit and the software hasn't been officially sanctioned by them. (The software is pretty cool, though!)
|
The version of the firmware for this post is: danish05 To use this file: Click the DOWNLOAD button to the right --> a) a README file with a few instructions, and Follow Qu-Bit's instructions for loading firmware files on your Neb2. |
Neb2Firmware05.zip |
The danish05 firmware is based on Qu-Bit's 2.1.2 version.
Main differences between the danish05 version of the firmware and Qu-Bit's 2.1.2 version of the firmware:
The danish05 firmware allows Neb2 user instruments to be coded to use the following:
There are other enhancements as well.
Pure Data (PD) instruments do not load correctly with this version of the firmware. If you load a PD instrument, the Neb2 module will crash. Restarting/rebooting the module will load the previous instrument that was working.
Click for current and older versions of the "danish##" firmware for the Neb2.
The firmware available here is not an official version of the firmware from Qu-Bit. The files available here are alternative versions of the software available from Qu-Bit. Please use these alternative versions at your own risk. (It is recommended that you keep a copy of the official firmware file from Qu-Bit, in case you need to reinstall an official version to your module.)